Racconet:Racconet is the perfect tool to thoroughly remove sealant residues on screw joints of water meters, wall and bathroom fittings. The days of incorrect and time-consuming cleaning of screw joints using a pocket knife or screwdriver are over. |
 Picture: Racconet used to clean 1/2" screw joint of wall fitting. |
|
Picture: Sealant residues on a DN 20 water meter screw joint being removed with Racconet. |
Use:Racconet is very easy to use: Place Racconet squarely on the unwanted sealant residues and remove them by turning three to four times, pressing gently, until the bare metal is exposed. The sealant residues are carried away through the channels below the scraper blades. The screw joint should be washed out after this operation. |
Scraper blade replacement:Racconet scraper blades are made of high quality medical grade steel and can be used many times! When the scraper blades become blunt from frequent use, they can be replaced. The blades are secured with four Torx screws and are easy to replace. |
 Picture: Screw joints cleaned with Racconet. |
 Picture: Drawing of Racconet Z DN 20 |
Problem solved, money saved:Sealant residues frequently cause screw joints to leak, often resulting in considerable costs for tradesmen. Racconet is the ultimate solution of this problem! If correctly used and if stress is avoided during reassembly, the result will be a 100% watertight screw joint, with no risk of having to repeat the work.
|
New developments:The five Racconet sizes currently available cover a very large proportion of the customary screw joint types. If a particular screw joint cannot be cleaned with Racconet, and if there is sufficient demand, our draughtsmen will be pleased to design a new tool size to extend our product range. |
|
"Only a clean surface is a watertight surface" |
|
